產品詳情 Product details

1.產品介紹

聲光一體報警器是我們廠根據港務機械、機電行業大、中型行車及船舶、碼頭、皮帶輸送設備的實際情況而研制的產品，本產品外觀新穎，警示燈利用目前最為流行的LED燈管制造而成，大大增加了燈管的使用壽命，本系列產品防護等級高，操作簡單，體積小，安裝方便等優點，具有良好的防水、防潮、抗沖擊抗強震性能，經過實際應用，多種音調報警提示對協調工作設備報警、保護人身安起到了重要的作用。

2、主要功能及特點

4、閃光燈內芯采用單片機特制而成，每秒閃光次數可以根據客戶要求制定。

5、多種組合配置方式,操作使用方便。

6、外殼采用鋁合金壓鑄而成，結構美觀，能有效的抵御鹽霧腐蝕特殊結構設計，具有良好的防水防潮、抗震功能。

3、安裝調試及使用方法

1、應檢查電源與聲光報警器的額定電壓是否相符。
2、語音聲光報警器用4個M6的螺絲與安裝面固定，安裝面應平整和有足夠的機械強度。

3、從填料函中接進電源線及控制線，按照標簽上的端子定義正確連接電源及控制線。

4、檢查電源線及其他控制線連接無誤后方可啟動電源。
5、旋動音量調節電位器可進行音量調節操作。
注:請按照說明書上所述方法正確安裝使用本產品

4、主要技術參數

1、Product Description

The sound and light integrated alarm is a product developed by our factory based on the actual situation of large and medium-sized vehicles in the port machinery , mechanical and electrical industries, ships, docks, and belt conveyors. The appearanceof this product novel, warning lights are manufactured by using the most popular LED tube at present, which greatly increases theservice life of the tube.This series of products have high protection level, simple operation, small size,and safety.Easyinstallation and other advantages, with good waterproof, moisture-proof, shock resistance and strong earthquake resistanceperformance. After practical application, multiple tone alarm prompts have played an important role in coordinating workequipment alarms and protecting personal safety.

2、Functions & Features

1.Alarm function.
2.lt is simple to use and can work continuously for a long time.
3.Dedicated integrated chip design, superior electromagnetic anti-interference performance.4.The innercore of the flash is specially made by a single-chip microcomputer.
5.A variety of combined configuration methods,easy to use.
6.The shell is made of aluminum alloy die-casting,beautiful structure,can effectively resist the special structure designof salt spray corrosion, and has good waterproof , moisture-proof, and shock-resistant functions.

3、lnstallation & Instructions

1.Check whether the power supply and the rated voltage of the sound and light alarm are consistent.
2.The sound and light alarm is fixed to the mounting surface with 4 M6 screws.The mounting surface should be flat and havesufficient mechanical strength.
3.Connect the power and control wires from the stuffing box, and connect the power and control wires corectly according to theterminal definition on the label.
4.Check that the power cord and other control lines are connected correctly before turning on the power.5.Turn the volume adjustment potentiometer to adjust the volume.
Note: Please install and use this product correctly as described in the manual。

4、Technical Parameters