產品詳情 Product details

1.產品介紹

本公司聲光報警器系列產品型號齊全，用戶可根據自身使用場合及要求選擇音色、音量及語音報警方式。聲音在空氣中的穿透力極強近距離宏亮且不刺耳，既能有效地警示工作人員，又對人體聽覺無傷害。同時安裝一體警示燈間歇閃亮，在日光下也可發出耀眼的強光?！副鞠盗挟a品是根據客戶現場多年使用需求而改講)

2、注意事項

1、聲光報警器應安裝在工作人員易看到和易聽到的地方;

2、聲光報警器周圍避免出現強光、大功率噪音等干擾物;

3、進行安裝操作時需先斷電，否則可能會燒壞聲光報警器;

4、應檢查電源與報警器額定電壓是否相符;
5、安裝時警示燈應朝上，采用膨脹螺絲壁掛安裝;
6、確定接線準確，然后啟動電源〔直流要區分正負極〉;

7、確保聲光報警器接地良好;
8、使用時定期檢測聲光報警器的性能，如損壞則由專業人員進行維修。

3.操作和使用說明

接線:聲光報警器是二線制接線的1棕色/紅色―------火線/＋
[根據實物所提供的工作電壓,直流的紅色是“+”，黑色的是“”﹔交流電
2蘭色/黑色-------零線/一
不分正負)
工作方式:通電喇叭聲音響起，并且警示燈亮起閃爍。接地的連接:聲光報警器底部有“”接地片，用焊錫絲焊接接地線與接地片以保證聲光報警器接地良好，或用接地線繞與固定接地片螺絲內，再擰緊接地片的螺絲以保證聲光報警器接地良好。

4.主要技術參數

1.Product Description

The sound and light alarm adopts advanced ASIC design,beautiful sound quality, strong anti-interference ability,stableperformance, novel design and generous.This model has been improved and has the characteristics of shock resistance andeasy installation. lt is made of high-quality alloy material, and the installation shellis made of low-carbon steel material andimported paint.
The company's sound and light alarm series product models are complete,users can choose the tone,volume and voice alarmmode according to yourselves use occasions and requirements. The penetration of sound in the air is extremely strong andclose-sighted, and it is not harsh, which can effectively alert staf and harm human hearing.At the same time, the integratedwarning light flashes intermittently and can emit dazzling strong light in daylight.
(This series of products are improved according to the customer's field use needs for many years)

2.Notes

1 .The sound and light alarm should be installed in a place where
staff can easily see and hear;
2.Avoid disturbing objects such as strong light and high power
noise around the sound and light alarm;
3.Power off before installation, otherwise the sound and light
alarm may be burned out;
4.Check whether the power supply matches the rated voltage
of the alarm;
5.The warning light should be facing upwards during installation
and wall-mounted installation with expansion screws;
6.Make sure the wiring is accurate, then start the power supply( DC should distinguish positive and negative poles);
7.Ensure that the sound and light alarm is well grounded;
8.Regularly check the performance of the sound and light alarm
when in use,and repair it by professionals if it is damaged.

3.Operation & Use instructions

wiring: sound and light alarm is two-wire wiring1.Brown / Red ------- Fire Wire / +
2.Blue / Black -------Zero Linei-
(According to the working voltage provided by the real thing, the red of the direct current is " " and the black is "-"; the alternatingcurrent does not distinguish between positive and negative)
Working method:The sound of the power-on horn sounds, and the warning light is flashing.
Ground connection: There is a " " ground piece at the bottom of the sound and light alarm. Weld the ground wire and
the ground piece with solder wire to ensure that the sound and light alarm is well grounded.Screw to ensure that the sound andlight alarm is well grounded.

4.Technical Parameters