產品詳情 Product details

1.產品名稱

Stainless Steel Sound and Light Alarm  and Light Alarm ST-100-CH4

Stainless steel sound and light alarm M20* 1.5 connector

Stainless steel sound and light alarm G1/2 connector

Stainless steel sound and light alarm G3/4connector

2.概述

GBS-24V型防爆聲光報警器，采用專用集成電路設計，工作隱定，使用壽命長，內部采用超高亮發光管，具有體積小、聲音大、重量輕、價格低廉等特點。

3.外形及安裝

該防爆聲光報警器為24VDC直接驅動，安裝時如安裝線纜長度不夠，應使用防爆接線盒擴展。安裝位置可選擇靠近門的位置，或人經常出入且清晰可見的地方。高度在1.6-2.2米為宜

4.使用方法

1、該聲光報警器可配合帶有節點輸出的氣體探測器和報警器一同使用。
2、接線前請將探測器或24V電源斷電，將聲光報警器的兩根電源線（黑;負）接入探測器或24V電源的負蠕，(紅線:DC24V)串入節點輸出中，并將節點輸出另一端接探測器或24V電源的DC24V正端即可。

5.主要技術參數

1.Product Name

Stainless Steel Sound and Light Alarm  and Light Alarm ST-100-CH4

Stainless steel sound and light alarm M20* 1.5 connector

Stainless steel sound and light alarm G1/2 connector

Stainless steel sound and light alarm G3/4connector

2.Product Description
GBS-24V explosion-proof sound and light alarm adopts ASIC design, stable operation, long service life, and ultra-high-brightness light-emitting tube inside.It has the characteristics of small size, loud sound, light weight and low price.

3.Shape & Installation
The explosion-proof sound and light alarm is directly driven by 24VDC. If the installation cable length is not enough duringinstallation , the explosion-proof junction box should be used for expansion. The installation position can be chosen near thedoor,or a place where people often come in and can see clearly.The height is 1.6-2.2 meters.

4.lnstructions
1.The sound and light alarm can be used with a gas detector and an alarm with a node output.

2.Before wiring, please power off the detector or 24V power supply, connect the two power lines (black:negative) of the soundand light alarm to the negative end of the detector or24V power supply, (red line: DC24V) serially into the node output , Andthe other end of the node output is connected to the detector or the DC24V positive end of the 24V power supply.

5.Technical Parameters