產品詳情 Product details

3、C型激光單點限位檢測，內置一個檢測單元和反射多棱鏡構成一個系統，采用大功率激光元件發射光脈沖信號。當防撞儀在設定的、位置時接受到回歸的反射光脈沖信號時，即繼電器動作驅動行車減速提示執行機構或停車執行機構;具有作用距離遠、穿透力強、采用偏移角度定位，距離設定準確等特點。適合在霧氣較大的環境中使用.

2.安全注意事項
1、安裝接線須由專業工作人員施工。
2、確認所提供的電源或防撞儀的銘牌上所標稱的電壓相符。

3、防撞儀所驅動的負載不大于5A。
4、避免將防撞儀安裝在陽光、白熾燈直射位置。

5、避免二臺防撞儀正面相對安裝，以免引起誤動。

6、定時清理防撞儀和多棱鏡上的灰塵，確保正常工作。

3.性能及技術參數

1.Functions

The anti-collision instrument is mainly used in mines, metallurgy, manufacturing. docks and other occasions.As an anti-collisionlimit warning device, it is an indispensable equipment for safe production of vehicles. This product is divided into three types:Atype, B type, and C type.Type Ais a laser calibration single point limitdetection.Type B is a lasercalibration two point limit detection.Type C is a laser single point limit detection.
1.A-type single-point limit detection, built-in a detection unit and reflective polygon mirror to form a system,when debugging.connect the red laser point emitted by the power collision avoidance device. Aim at the polygon mirror on the drive opposite.When driving beyond the preset safety distance.The bumper detects a returning pulse of reflected light.Machine relay action todrive the stop reminder execution mechanism;
2.B-type two-point limit detection, built-in two detection units and reflective polygon mirror to form a system, when debugging.connect the red laser point emitted by the power anti-collision device to the polygon mirror on the opposite vehicle;There aretwo detection points with different distances within the running distance. The first detection point detects the reflected light pulsesignal, that is , the relay action drives the vehicle to slow down and prompts the actuator; the second detection point detects thereflected light pulse signal, which is thell relay action.Drive the parking reminder actuator;
3.C-type laser single-point limit detection, built-in a detection unitand reflective polygon mirror to form a system,using high-power laser elements to emit light pulse signals. When the anti-c ollision device receives the returning reflected light pulse signalat the set and position, that is, the relay action drives the vehicle to slow down and prompt the actuator or the parking actuator;it has a long working distance, strong penetrating force,and uses an ofset angle for positioning , accurate distance setting.Suitable for use in foggy environments.

2.Safety Precautions

1.lnstallation and wiring must be performed by professional staff.2.Confirm that the nominal voltage provided on the nameplateof the power supply or anti-collision device matches.
3.The load driven by the collision avoidance device is not morethan 5A.
4.Avoid installing the anti-collision device in direct sunlight orincandescent light.
5.Avoid installing two anti-collision devices on the front side toavoid misoperation.
6.Regularly clean up the dust on the collision avoidance deviceand the polygon mirror to ensure normal work.

3.Technical Parameters