產品詳情 Product details
?
CLBO01-32P PRODUCT SPECIFICATION AND OVERVIEW
The product is used in solar system, the voltage can reach 1500VDC;the mechanismof the product move fast, breaking the contact quickly;and the category is DC21B.Assemble conveniently,its wiring and operation tools are not in a direction;All wiringoperations are in the same direction,improve tool usage ,reduce the product ofoccupied space,and the product replacement and maintenance is more convenient.( similar product wiring and operation tool are in the same direction, occupy largeispace,the assemble is not convenient).
The switch has small volume,short arc extinguishing time,multiple contacts operatingat the same time and other advantages.lt has 100ovDCand 1500VDC specifications.The 10oovDC products can be used in solar system with rated voltage less than1000 and below,rated current less than 32A;The 1500vDC products can be used inphotovoltaic system with rated voltage 1500v or below, rated current 16Aor below.ln use of the wiring, it is no DC polarity requirements, the power pole and loadipole can be arbitrarily selected according to their own requirements.
The isolator switch have 2P ,4P,6P three specification, 2P can be used in a set ofsystem loops;4P can be used in two sets of system loops,and 6P can be used in 3
Technical data
PRODUCT INSTALLATION AND SIZE
Panel opening dimensions
lso lator Installation
Put the sealed waterproof pad 2 on the body of isolator switch
Put the handle 5 of the mounted screw 6 on the handle.
Put the handle 5 of the mounted screw 6 on the handle shaft, and use 1# screwdriver
(1.2Nm-1.5Nm torque) tighten the screw on the handle shaft.